Plastic Enclosure for MegaDisplay 7S

Black enclosure which can house the MINI2440v2, TenByTen6410, and MegaDisplay 7S Including Touchscreen, with MIS-D 75 VESA mount compatibility.  Solid, simple, and easy to use. 

More details

On sale On sale!

Availability: in stock

Hiteg has taken the time to design and manufacture its very own unique plastic enclosure specialized to house our MegaDisplay 7S TFT display and with your choice of development board, i.e.: the MINI2440, MINI2440v2, or TenByTen6410 development board. The design focuses on simplicity, and ease of use with its full I/O port integration, easy touch power button, compatibility with MIS-D 75 (75x75mm) VESA stands for wall mounting solutions, and to mention a sturdy 2mm wall thickness and an intuitive design. The base is designed to allow a visually pleasing cable and peripheral arrangement as its design offers a wide and spacious area near the connection ports.

Enclosure port wings offer great room for your peripheral devices.

The satin smooth surface finish creates a classy appearence with a modest gloss to ensure that your application will always be in the center of interest.  The top and back shell are designed to be symetrical allowing you to choose which side you want, for which connectors.

The integrated power PCB and button allow you to easily switch on and off the MINI or the TenByTen6410 by using the power connector found on either boards. A four pin cable for the MINI is included.

For a full tutorial on how to assemble a development board and display into this enclosure, visit the above " How-To's " tab.  You may also find the mechanical drawing under the above " Download " tab.


UPDATE: It is now possible to order the enclosure in any color you like, just leave us a Pantone color. We have a minimum order quantity of 50 pieces, no extra costs needed. In the same run, you can get for just two dollars more, a conductive cupper paint on the inside for EMI shielding. You can set regions where you do not want it, for WiFi or other RF signals to pass through.


  • One Plastic Enclosure for MegaDisplay 7S with MIS-D 75 VESA mount compatibility (75x75mm)
  • One power PCB and cable set for MINI and TenByTen6410
  • Four screws to mount the MINI2440(v2) and TenByTen6410 into the back shell
  • Eight screws to mount the MegaDisplay 7 onto the front shell
  • Eight screws to fasten back and front shell together
    • Width 178.0mm
    • Length 241.0mm
    • Height 47.5mm
    hardware Assembling the MINI2440 or TenByTen6410 board into the Plastic Enclosure for MegaDisplay 7S

    Instructions on how to assemble the MINI2440, MINI2440v2, or TenByTen6410 into Hiteg's Plastic Enclosure for MegaDisplay 7S


    Customers who bought this product also bought:

    Informations After saving your customized product, do not forget to add it to your cart.


    • Pantone color

    * required fields


    No specials at this time



    New products

    No new products at this time